On the Subject of Bob Barks

Bob, do I have all five stages right?

See Appendix A for indicator identification reference.

• This module contains four indicator labels with corresponding buttons.
• One of the four buttons will flash per stage.
• Each stage will also repeat the flashes from previous stages.
• The sequence will repeat after a short delay. Your input is not reset when this happens.
• Using the tables below, press the correct indicator button based on which indicator button was flashing.
• When a correct button is pressed, the indicator labels will disappear.
• If you press an incorrect button, the indicator labels will reappear, and your input is reset.
• The sequence will lengthen by one each time you correctly enter a sequence until the module is disarmed.

Use Table 1 for determining which indicator button should be pressed first, and Table 2 for determining which indicator buttons should be pressed in each subsequent stage. Use the rule from the first row in each table that applies.

Table 1

If the flashing indicator is…	If the flashing button’s position is…
	Top-left	Top-right	Bottom-left	Bottom-right
…present, is lit, named "BOB", and the labels "CAR" and "KEY" are also on the module:	You just won a BRAND NEW CAR! The correct button for every stage is the one with the label "CAR". Ignore all other rules.
…present, is lit, and named "BOB":	TL	TR	BL	BR
…present, is lit, but not named "BOB":	BR	BL	TR	TL
…present, but is not lit:	TR	TL	BR	BL
…not present:	BL	BR	TL	TR

Table 2

Each cell contains an indicator name, and a location in italics. If there is a label with the indicated name on the module, press the button that corresponds to that label. Otherwise, press the button in the location in italics.

If the previously pressed indicator is…	If the flashing indicator is…
	BOB	CAR	CLR	IND	FRK	FRQ	MSA	NSA	SIG	SND	TRN	Other
…present and lit	CAR BL	CLR TR	SIG BR	SND OPP	FRQ TL	FRK TL	NSA CCW	MSA BR	TRN BL	IND TR	BOB CW	FLS
…present, but not lit	SND TL	NSA BL	FRQ CCW	SIG TR	MSA BR	TRN TR	BOB BR	IND TL	CAR CW	FRK FLS	CLR BL	OPP
…DOG or BUB	FRK FLS	IND TL	SND BR	CLR CW	TRN TR	SIG BR	FRQ BL	CAR CCW	NSA TR	BOB BL	MSA TL	CCW
…KEY or ETC	TRN OPP	BOB CW	FRK TL	CAR BR	SIG CCW	IND BL	CLR TL	FRQ BL	MSA TL	SND BR	NSA TR	CW
…not present, but flashing is present	FRQ BR	SIG TR	BOB BL	FRK TL	CLR BL	MSA CCW	TRN BR	SND TL	IND TR	NSA CW	CAR OPP	n/a
…not present	CLR TR	FRQ BR	MSA CW	BOB BL	NSA FLS	SND TR	IND BL	SIG BR	FRK CCW	CAR TL	TRN BR	FLS

Notes:

• The "flashing indicator" refers to the indicator label next to the currently flashing button.
• The "previously pressed indicator" refers to the indicator label next to the button that was pressed in the previous stage.
• TL / TR / BL / BR: Press the top-left / top-right / bottom-left / bottom-right indicator buttons, respectively.
• CW / CCW: Press the button one position clockwise / counter-clockwise from the flashing indicator button, respectively.
• OPP: Press the button directly opposite the flashing indicator button.
  (e.g.: If the top-left button is flashing, press the bottom-right button.)
• FLS: Press the flashing indicator button.